| Customization: | Available |
|---|---|
| After-sales Service: | Online After-Sales Service |
| Warranty: | 50 Years |
|
Still deciding? Get samples of US$ 0.1/Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Steel Plastic composite pipe SRTP Steel Wire Reinforced HDPE Composite Pipe
| DN/mm | Pressure/MPa | |||||
| 1 | 1.25 | 1.6 | 2 | 2.5 | ||
| Specification | Deviation | EN/mm AND Deviation/mm | ||||
| 50 | 0+1.0 | 4.5 | 5.00 | 5.50 | ||
| 75 | 0+1.2 | 5.00 | 5.00 | 5.50 | ||
| 90 | 0+1.4 | 5.50 | 5.50 | 5.50 | ||
| 110 | 0+1.5 | 5.50 | 5.50 | 7.00 | 7.00 | 7.50 |
| 140 | 0+1.7 | 5.50 | 5.50 | 8.00 | 8.50 | 9.00 |
| 160 | 0+2.0 | 6.00 | 6.00 | 9.00 | 9.50 | 10.00 |
| 200 | 0+2.3 | 6.00 | 6.00 | 9.50 | 10.50 | 11.00 |
| 225 | 0+2.5 | 8.00 | 8.00 | 10.00 | 10.50 | 11.00 |
| 250 | 0+2.5 | 10.50 | 10.50 | 12.00 | 12.00 | 12.50 |
| 315 | 0+2.7 | 11.50 | 11.50 | 13.00 | 13.00 | |
| 355 | 0+2.8 | 12.00 | 12.00 | 14.00 | ||
| 400 | 0+3.0 | 12.50 | 12.50 | 15.00 | ||
| 450 | 0+3.2 | 13.50 | 13.50 | 16.00 | ||
| 560 | 0+3.2 | 20.00 | ||||
| 630 | 0+3.2 | 23.00 | ||||
Features
1.Higher strength resistance and creep resistance.
2.Excellent stiffness, impact resistance. Low linear expansion coefficient.
3.Smooth inner wall, won't covered with dirt. Low flow resistance, high flow capacity.
4.Both the inner and outer wall are made of plastic, lead the pipe and fittings owns good corrosion resistance.
5.Light weight, easy to transport.
6.Use elector-fusion joint, no leakage in the joint, fast and easy installation.
7.The product is composite with steel wire and plastic, overcome the fast stress crack of plastic pipe.
8.Good abrasion resistance. The product can work for more than 50 years under normal use.
9.low in cost, hygienic and non-toxic than galvanized pipe
Connection Method:
This technique of heat fusion joining is a bit different from the conventional fusion joining.The electro fusion joint is heated internally,either by a wire coil at the interface of the joint or, as in one design, by a conductive polymer.Heat is created as an electric current is applied to the conductive material in the fitting.
General steps to be followed when performing electro fusion joining are:
1.Prepare the pipes
2.Clamp the fittings and pipe(s)
3.Apply the electric current
4.Cold and remove the clamps
Our unmatched expertise enables us to serve our clients with utmost accuracy than ourindustry competitors. With more than 20 years' hardwork, we have established ourselves asa reliable and worthy supplier of plastic pipes and fittings. We ensure that the quality of ourrange meets the requirements of our clients. Our range finds applications in irrigation, watertransportation, drainage, dredging, sand&mud suction, gas transportation, geothermal, communication cable protection and construction.
Q: What the Raw material ?
){kind=link}